Today, epoxy floor paints are used in a wide range of applications and are a very aesthetically pleasing and durable floor paint. As early as the beginning of the last century, epoxy floor paint began to be widely used in workshops and other places, it not only keeps the ground fresh, but also has a long service life. Next, Jieda Coatings Xiaobian will tell you how to solve the problems in the construction process of epoxy floor paint. Let's take a look.

1, the bottom

The reason why the bottom will occur, if the thickness of the coating of the West Lake does not meet the requirements, or the coating coating is unevenly laid, then the coating itself is not good enough, and the film needs to reach a certain thickness. If the diluent is placed too much during construction, there will be a problem with the bottom. To avoid this problem, the paint film must be evenly coated, choose to use the appropriate coating material for the construction, and add thinner as required.

2, the surface is uneven

If impurities are mixed during the construction process, unevenness occurs on the ground, or the ground undulation is too large, the construction floor specifications are too thin, which may cause surface irregularities. In the process of coating the material, some reactions have already taken place, resulting in a large viscosity, and even a hard block, which will cause the ground to be uneven. Therefore, during construction, the environment must be clean, choose quartz sand with uniform particles, the ground must be treated flat and clean. If there are bumps, repair it in time, and remove the attachments. Select the appropriate specifications according to the actual situation. Floor. When the material is coated before and after, be sure to allow sufficient time for the connection to be completed.

The above is the Jieda paint Xiaobian for everyone to organize how to solve the problems of the epoxy floor paint in the construction process, I hope to help everyone.